FOR SALE - **sale pending**
1990 Eagle Talon TSI track car $5000.00
Vehicle will be sold "as is" in a "non running" condition. Nothing will be sold separately
90 block with Eagle 2.3 stroker kit with custom Ross 8:1.1 compression pistons with gas port reliefs.
Kiggly girdle,shaved for stroker clearances, Arp main studs, upgraded Arp Rod bolts.
6 bolt Moroso 6.25 QT oil pan clearance for girdle and stroker.
Felpro MLS head gasket with A1 technology head studs
Fox Lake Racing CNC ported cylinder head +2mm oversized valves, Ferra springs and retainers.
Crower 440 cams
Unorthodox CAM Gears
Shepherd Racing stage 3 setup.
Has roughly 100 miles since the build.
Locked center diff and VC elimination kit.
Rest of the Driveline:
Stock 1G rear diff with DSS PRO axles (axles included)
Three speed scattershield.
universal driveshaft loop for NHRA regulations.
PTT twin disc clutch
NHRA legal battery cutoff with alternator disconnect
Battery relocated in Taylor battery box with circuit breaker
Optima yellow top battery
Three seven circuit fuse blocks with harnesses for aftermarket electronics
ECMLink with cable
MSD DIS2 ignition mounted in rear to reduce heat exposure.
Coil on plug setup with 300M
GM MAF with translator
3.5" exhaust with test pipe. Full v-band joints for easy removal.
JM Fabrication divided top mount with Tial waste gate and open dump
Fuel Supra in-tank fuel pump
S/S -6 AN fuel supply and return lines with Aeromotive fuel filter
Aeromotive Pro-Comp mechanical guage
Gauge lights wired to dash lights
Aeromotive fuel pressure regulator
Magnus fuel rail with phenolic insulators
Polished, bolts are insulated with phenolic to reduce heat transfer
FIC 950cc injectors
Baer Track systemi
OEM rear calipers
Electric water pump
Water pump block off plate
Allows electric water pump to be installed without any modifcation to block or head.
180 degree thermostat with high pressure radiator cap
Aluminum radiator with lower A/N line
Spal and Derale Pusher fans (included and would need to be installed)
Mounted on front of radiator, both run at the same time. Single speed, under ECU control or manual on from dash switch.
Q45 throttle body w/AN coolant lines and DSM TPS
3" I/C piping with Tial BOV and G/M IAT sensor
Steel piping, MIRLOC T BOLT clamps at JMF FMIC Core
JMF Intake Manifold with options for Nitrous Direct Port Nozzles
JMF Intake Manifold flanged for Q45
JIC Adjustabe struts with coilovers
Volk Bronze TE-37's with Hoosier DOT slicks
Turbo related stuff:
Turbosmart Eboost boost controller (40 psi)
F/P 4094 4" inlet (needs service)
Turbocharger F/P turbo oil filter Black filter
Turbocharger AN -10 turbo oil return
Stock guage cluster with Aeromotive Tach, Spedometer, Oil pressure, Fuel level gauges.
OEM LED warning lights work correctly.
Aeromotive Boost guage
Misc included items:
JMF Aluminum fuel tank (in the box)
Previous WAIC parts